Standard Lightning & Earthing Products

Air terminals and fixings
Conductors
Test and junction clamps
Conductor fixings
Earth point
Earth rod clamps
Earth rods
Inspection pits and earth rod seals

Air terminals and fixings

Taper pointed air rod

Rod length Rod diameter Thread diameter Material Weight per rod Part no.
500mm 15mm 16mm Copper 0.73kg RA215
1000mm 15mm 16mm Copper 1.51kg RA225
2000mm 15mm 16mm Copper 3.00kg RA240

Can be installed with or without multiple point. Supplied with locknut.

 Taper pointed air rod

Multiple point

Rod diameter Material Weight per rod Part no.
16mm Copper 0.27kg RA600

For use with taper pointed air rods.

 Multiple point

Air terminal base

Rod diameter Thread diameter Maximum conductor width Material Weight each Part no.
15mm 16mm 25mm Copper 0.47kg SD105
 Air terminal base

Ridge saddle

Rod diameter Thread diameter Maximum conductor width Material Weight each Part no.
15mm 16mm 31mm Copper 1.07kg SD115
 Ridge saddle

Strike pad

Material Weight each Part no.
Copper 0.41kg PL010
Aluminium 0.13kg PL005

Description Weight each Part no.
Copper stem for use with PL010 0.07kg SM010
 Strike pad

Rod brackets

Air rod diameter Rod material Weight each Part no.
15mm Copper 0.90kg BR105
 Rod brackets

Rod to tape coupling

Air rod diameter Thread diameter Rod material Weight each Part no.
15mm 16mm Copper 0.23kg CG600

Used in conjunction with rod brackets above.

 Rod to tape coupling

Back to top Top of the page

Conductors

Stainless steel (Grade 304)

Conductor size Weight per meter Standard coil size Part no.
25x3mm 0.67kg 4m SS001
25x3mm 0.67kg 4m SS002*

*M8 holes for fixing at 500 centres.

External link : Click for full manufacture's parts list http://www.furse.com/

Stainless steel (Grade 304)

Back to top Top of the page

Test and junction clamps

Square tape clamp

Conductor size Conductor material Weight each Part no.
25x3mm Copper 0.23kg CT105
25x6mm Copper 0.42kg CT110
31x3mm Copper 0.30kg CT113
50x6mm Copper 0.98kg CT115
25x3mm Aluminium 0.07kg CT005

Recommended fixing - counter sunk woodscrew 1 1/2" x no.10 and wall plug. For forming straight through, cross or tee joints in tape.

 Square tape clamp

Oblong test or junction clamp

Maximum conductor size Conductor material Weight each Part no.
26x8mm Copper 0.29kg CN105
26x8mm Aluminium 0.12kg CN005

For straight through tape joints.

 Oblong test or junction clamp

Disconnecting links

Description Length Width Height Weight each Part no.
Disconnecting link 125mm 90mm 90mm 0.59kg LK205
 Disconnecting links

Back to top Top of the page

Conductor fixings

Non-metallic DC tape clip

For use with bare tape

Conductor size Colour Weight each Part no.
25x3mm Brown 0.01kg CP015
25x3mm Grey 0.01kg CP020

Non-metallic DC clip - High grade polypropylene, UV stabilised against degradation by sunlight and non-brittle to prevent cold weather damage. This unique design provides easy installation whilst ensuring the tape is gripped firmly and resists high pull off loads.

Non-metallic DC tape clip

Tape clip

For use with bare tape

Conductor size Weight each Part no.
25x3mm 0.02kg CP515

For use with stainless steel

Conductor size Weight each Part no.
25x3mm 0.02kg CP615

Tape clip


Tape clip stainless steel

Slate holdfast

For use with bare tape

Conductor size DC Clip colour Weight each Part no.
25x3mm Brown 0.06kg HF015
25x3mm Grey 0.06kg HF020


Slate holdfast

Back to top Top of the page

Earth point

Single hole earth point

Hole size Length Weight Part no.
M10x15mm 80mm 0.14kg PC101

Stem diameter = 10.7mm (70mm)

 Single hole earth point

Back to top Top of the page

Earth rod clamps

Rod to tape clamp (type A)

Nominal rod diameter Max. conductor Weight each Part no.
5/8" 16mm 26x12mm 0.15kg CR105
5/8" 16mm 40x12mm 0.24kg CR110

All Furse earth rod clamps have high strength copper alloy bodies and screws e.g. aluminium bronze, phosphor bronze etc., COMMERCIAL BRASS IS NOT USED. Corrosion resistance, conductivity and mechanical strength are essential considerations in clamp design to ensure an earthing system remains operative for many years.

 Rod to tape clamp (type A)

Rod to tape clamp (type G)

Nominal rod diameter Conductor range Weight each Part no.
3/8" 9.5mm 6-35mm 0.03kg CR505
5/8" 16mm 16-70mm 0.06kg CR515
 Rod to tape clamp (type G)

'U' bolt rod clamp (type E)

Nominal rod diameter Hole centres Tape width Weight each Part no.
5/8" 37mm - 0.20kg CR305
5/8" 37mm 25mm 0.26kg CR320

'U' Bolt threaded M10. CR320 includes additional plate to allow tape to be clamped without drilling.

 'U' bolt rod clamp (type E)

'U' bolt rod clamp (type E)

Rod to cable clamp (type GUV)

Nominal rod diameter Conductor range Weight each Part no.
5/8" 16mm 16-95mm 0.39kg CR700
3/4" 20mm 16-70mm 0.39kg CR700
5/8" 16mm 70-185mm 0.39kg CR705
3/4" 20mm 70-150mm 0.39kg CR705
 Rod to cable clamp (type GUV)

Back to top Top of the page

Earth rods

Threaded copperbond earth rods

Nominal diameter Length Thread diameter 'B' Shank diameter 'A' Weight each Part no.
5/8" 1500mm 5/8" 14.2mm 1.88kg RB210
5/8" 1800mm 5/8" 14.2mm 2.29kg RB215
5/8" 2400mm 5/8" 14.2mm 3.00kg RB225
5/8" 3000mm 5/8" 14.2mm 3.79kg RB235

Fittings

Type Weight each Part no.
5/8" Coupling 0.08kg CG270
5/8" Driving stud 0.08kg ST200

BS 7430, BS 6651, UL467

 Threaded copperbond earth rods

Back to top Top of the page

Inspection pits and earth rod seals

Lightweight inspection pit

Lid colour Weight each Part no.
Grey 1.80kg PT205
Black (unbranded) 1.80kg PT309-FU

Other lid colours are available subject to order quantity. Please phone for details.

 Lightweight inspection pit

Back to top Top of the page

External link : For a full list of products see http://www.furse.com/